How To Assemble Dive Equipment
How To Assemble Dive Equipment the right way is important for safety and it can improve your Diving Experience Significantly!
It is important that you learn this skill because you need to assemble dive equipment before every dive and also as a scuba diving skill during the Open Water Diver Course. During the Divemaster and IDC Course you need to demonstrate How To Setup Dive Gear in Divemaster and IDC skill circuit.
It is important that you learn this skill because you need to assemble dive equipment before every dive and also as a scuba diving skill during the Open Water Diver Course. During the Divemaster and IDC Course you need to demonstrate How To Setup Dive Gear in Divemaster and IDC skill circuit.
How To Assemble Dive Equipment
There are different styles on How To Assemble Dive Equipment, in the video below we follow these steps:
1. Inspect the tank, visual inspection sticker and the hydrostatic test date
2. Check the O-Ring
3. Open the tank valve and give a little burst to clean the valve
4. Put the BCD correctly over your scuba cylinder
5. At least 4 fingers from the top
6. Attach the Safety Strap
7. Make sure everything is attached correctly
8. Grab your regulator and unscrew the dust cap from the first stage
9. Place the first stage over the valve
10. Gently screw the first stage on the tank valve (Only 3 finger tight)
11. Attach the low-pressure inflator hose to the BCD
12. Attach the alternate air source
13. Streamline everything
14. Turn the SPG glass away from anyone
15. Slowly open up the tank valve
16. Finished
After finishing Assembling the Dive Equipment, you should do a full dive equipment check up:
1. Fully inflate the BCD to check for leaks and the LPI
2. Orally Inflate the BCD
3. Purge, smell and breath through the second stage, while checking the SPG
4. Check the alternate air source
5. Make sure the dive equipment is streamlined
6. Gently place your equipment on its side
How To Assemble Dive Equipment becomes much more easier after a few tries. It is still very important to do a buddy check after you assemble the dive gear to make sure you setup your dive gear correctly.
Check out this video on How To Assemble Dive Equipment 👇
1. Inspect the tank, visual inspection sticker and the hydrostatic test date
2. Check the O-Ring
3. Open the tank valve and give a little burst to clean the valve
4. Put the BCD correctly over your scuba cylinder
5. At least 4 fingers from the top
6. Attach the Safety Strap
7. Make sure everything is attached correctly
8. Grab your regulator and unscrew the dust cap from the first stage
9. Place the first stage over the valve
10. Gently screw the first stage on the tank valve (Only 3 finger tight)
11. Attach the low-pressure inflator hose to the BCD
12. Attach the alternate air source
13. Streamline everything
14. Turn the SPG glass away from anyone
15. Slowly open up the tank valve
16. Finished
After finishing Assembling the Dive Equipment, you should do a full dive equipment check up:
1. Fully inflate the BCD to check for leaks and the LPI
2. Orally Inflate the BCD
3. Purge, smell and breath through the second stage, while checking the SPG
4. Check the alternate air source
5. Make sure the dive equipment is streamlined
6. Gently place your equipment on its side
How To Assemble Dive Equipment becomes much more easier after a few tries. It is still very important to do a buddy check after you assemble the dive gear to make sure you setup your dive gear correctly.
Check out this video on How To Assemble Dive Equipment 👇
In this video we used the Scuba Pro Glide BCD, which is one of the most comfortable Scuba BCD's on the Market. We also used the Scuba Pro MK25 Regulator which delivers more the 10.000 liters of air per minute for the easiest breathing feeling. Are you looking for a new BCD or Regulator? Then we highly recommend these 2 models:
Next Skill: Buddy Check - BWRAF
Marcel van den Berg
PADI Platinum Course Director
PADI Platinum Course Director
SCUBA DIVING TIPS
Privacy Policy
Disclaimer: Marcel van den Berg is a certified PADI Divemaster (2007), OWSI (2007), MSDT (2007), IDCSI (2008), Master Instructor (2010) and Course Director since 2011. This video and other video’s on any Facebook Page, Group or Personal Profile and on the YouTube Channels: Marcel van den Berg and Scuba Diving Tips are for general informational purposes only. Always seek the advice of your Local Law, Scuba Diving Training Organisation, RSTC and/or your scuba diving professional that is legally teaching/guiding you scuba diving whenever you are in doubt, or following a scuba diving course / guide scuba dive under the supervision of a scuba dive professional from any worldwide dive industry recognised scuba dive organisation. Marcel (Mario) van den Berg, IDC Koh Tao Thailand, Scuba Diving Tips and/or any related Website, Facebook Page, Group, or Personal Profile are not liable or responsible for any advice, trading tips or any other information, services or products you obtain through this video or site. Marcel (Mario) van den Berg, IDC Koh Tao Thailand, Scuba Diving Tips and/or any related Facebook Page, Group, or Personal Profile are not liable or responsible for any injury, financial loss, failing a scuba diving course and or loss of certification.
As an Amazon Associate I earn from qualifying purchases.
Copyright 2017 - 2020 | All Rights Reserved
Disclaimer: Marcel van den Berg is a certified PADI Divemaster (2007), OWSI (2007), MSDT (2007), IDCSI (2008), Master Instructor (2010) and Course Director since 2011. This video and other video’s on any Facebook Page, Group or Personal Profile and on the YouTube Channels: Marcel van den Berg and Scuba Diving Tips are for general informational purposes only. Always seek the advice of your Local Law, Scuba Diving Training Organisation, RSTC and/or your scuba diving professional that is legally teaching/guiding you scuba diving whenever you are in doubt, or following a scuba diving course / guide scuba dive under the supervision of a scuba dive professional from any worldwide dive industry recognised scuba dive organisation. Marcel (Mario) van den Berg, IDC Koh Tao Thailand, Scuba Diving Tips and/or any related Website, Facebook Page, Group, or Personal Profile are not liable or responsible for any advice, trading tips or any other information, services or products you obtain through this video or site. Marcel (Mario) van den Berg, IDC Koh Tao Thailand, Scuba Diving Tips and/or any related Facebook Page, Group, or Personal Profile are not liable or responsible for any injury, financial loss, failing a scuba diving course and or loss of certification.
As an Amazon Associate I earn from qualifying purchases.
Copyright 2017 - 2020 | All Rights Reserved